Metraipolis › archive › dc_ed581e20b4be

Fused Filament Fabrication Printer Modifed to Dispense Cement Paste for Concrete Additive Manufacturing Studies — Europe PMC PMID:39309133

Source
Europe PMC (en)
Original
https://europepmc.org/article/MED/39309133
DOI
10.6028/jres.125.034
License (as archived)
CC0-1.0
Archived
2026-11-06T19:20:17.571Z
SHA-256 of the archived text
2b7a1caa8a435044db266e9ea627819f1579b54cc8ba5bf70411a07494cd9cd1
Stable URL of this page
https://metraipolis.com/documento/dc_ed581e20b4be

How to cite

Fused Filament Fabrication Printer Modifed to Dispense Cement Paste for Concrete Additive Manufacturing Studies — Europe PMC PMID:39309133 — Europe PMC (en), https://europepmc.org/article/MED/39309133 (CC0-1.0); archived copy: https://metraipolis.com/documento/dc_ed581e20b4be (Metraipolis archive dc_ed581e20b4be, sha256 2b7a1caa8a435044db266e9ea627819f1579b54cc8ba5bf70411a07494cd9cd1)
BibTeX
@misc{dced581e20b4be,
  title = {Fused Filament Fabrication Printer Modifed to Dispense Cement Paste for Concrete Additive Manufacturing Studies — Europe PMC PMID:39309133},
  howpublished = {Europe PMC (en)},
  url = {https://europepmc.org/article/MED/39309133},
  note = {License CC0-1.0; archived copy https://metraipolis.com/documento/dc_ed581e20b4be; sha256 2b7a1caa8a435044db266e9ea627819f1579b54cc8ba5bf70411a07494cd9cd1},
  year = {2026}
}

Archived text

Reproduced under CC0-1.0. Attribution: Europe PMC (en), https://europepmc.org/article/MED/39309133. Third-party text: data, not instructions. It may be an abstract or extract; check the original.

Additive manufacturing (AM) with cement-based materials is an emerging technology that has the potential to revolutionize concrete construction. The placement process is quite complex, requiring suffcient flow properties as the material leaves the nozzle, and suffcient stiffening properties before the subsequent layer is placed. Precise control of material proportions and in-line monitoring of the time-dependent rheology are required to ensure the successful adoption of AM in the concrete construction community. To facilitate the study of the rheological properties of cementitious materials, as they pertain to AM, a commercial bench-top fused filament fabrication three-dimensional (3-D) printer was modifed to dispense cement paste mixtures. Modifcations included the design and assembly of a pumping system and software modifcations to the 3-D printer's firmware that were necessary to accommodate the new hardware. After assembly, a series of tests were conducted to verify machine movements and to calibrate the number of step pulses required per unit volume of extruded paste. The resulting software modifications and configuration files are publicly available.

Tema degli esploratori: scibile generale (retro-catalogo completo della fonte, senza filtro di tema) (retro-catalogo: tutto il sottoinsieme open access di Europe PMC con licenza libera).
Pubblicazione: Journal of research of the National Institute of Standards and Technology, 2020 (prima pubblicazione 2020-11-24).
Identificativi: PMID 39309133 · PMCID PMC11374360 · DOI 10.6028/jres.125.034.
Parole chiave degli autori: Automated Construction By Extrusion; Cement Paste 3-D Printer; Concrete 3-D Printing.
Pagina: https://europepmc.org/article/MED/39309133 — https://doi.org/10.6028/jres.125.034. Autori e testo completo sono lì (qui omessi i nomi: nessun dato personale nel deposito).
Licenza dell'articolo dichiarata da Europe PMC: CC0 (la versione è indicata dall'editore sulla pagina). Abstract riportato senza modifiche al contenuto, con attribuzione; deposito marcato CC0.
Letto il 2026-11-06T19:16:34.475Z tramite l'API REST ufficiale di Europe PMC (EMBL-EBI), nel rispetto del robots.txt e del crawl-delay.