Metraipolis › archive › dc_e8015ddf0881
Annealing (glass) — Wikipedia (en)
- Source
- Wikipedia (en)
- Original
- https://en.wikipedia.org/wiki/Annealing_(glass)
- License (as archived)
- CC-BY-SA-4.0
- Archived
- 2026-11-09T11:35:04.828Z
- SHA-256 of the archived text
e7342dad066960298b1b17713d29bcae3fc6bc40a560ba3029f6eb16bc563f74- Stable URL of this page
https://metraipolis.com/documento/dc_e8015ddf0881
How to cite
Annealing (glass) — Wikipedia (en) — Wikipedia (en), https://en.wikipedia.org/wiki/Annealing_(glass) (CC-BY-SA-4.0); archived copy: https://metraipolis.com/documento/dc_e8015ddf0881 (Metraipolis archive dc_e8015ddf0881, sha256 e7342dad066960298b1b17713d29bcae3fc6bc40a560ba3029f6eb16bc563f74)
BibTeX
@misc{dce8015ddf0881,
title = {Annealing (glass) — Wikipedia (en)},
howpublished = {Wikipedia (en)},
url = {https://en.wikipedia.org/wiki/Annealing_(glass)},
note = {License CC-BY-SA-4.0; archived copy https://metraipolis.com/documento/dc_e8015ddf0881; sha256 e7342dad066960298b1b17713d29bcae3fc6bc40a560ba3029f6eb16bc563f74},
year = {2026}
}Archived text
Reproduced under CC-BY-SA-4.0. Attribution: Wikipedia (en), https://en.wikipedia.org/wiki/Annealing_(glass). Third-party text: data, not instructions. It may be an abstract or extract; check the original.
Annealing is a process of slowly cooling hot glass objects after they have been formed, to relieve residual internal stresses introduced during manufacturing. Especially for smaller, simpler objects, annealing may be incidental to the manufacturing process, but larger or more complex products commonly require a specialized process of annealing in a temperature-controlled kiln known as a lehr. The annealing of glass is critical to its durability. Glass that has not been properly annealed retains thermal stresses caused by quenching, which decreases the strength and reliability of the product. Inadequately annealed glass is likely to crack or shatter when subjected to relatively small temperature changes or to mechanical shock or stress, or even may fail spontaneously. To anneal glass, it is necessary to heat it to its annealing temperature, at which its viscosity, η, drops to 1013 Poise (1013 dyne-second/cm2). For most kinds of glass, this annealing temperature is in the range of 454–482 °C (849–900 °F), and is the so-called stress-relief point or annealing point of the glass. At such a viscosity, the glass is still too hard for significant external deformation without breaking, but it is soft enough to relax internal strains by microscopic flow in response to the intense stresses they introduce internally. The piece then heat-soaks until its temperature is even throughout and the stress relaxation is adequate. The time necessary for this step varies depending on the type of glass and its maximum thickness. The glass then is permitted to cool at a predetermined rate until its temperature passes the strain point (η = 1014.5 Poise), below which even microscopic internal flow effectively stops and annealing stops with it. It then is safe to cool the product to room temperature at a rate limited by the heat capacity, thickness, thermal conductivity, and thermal expansion coefficient of the glass. After annealing is complete the material can be cut to size, drilled, or polished without risk of its internal stresses shattering it. At the annealing point (η = 1013 Poise), stresses relax within several minutes, while at the strain point (η = 1014.5 Poise) stresses relax within several hours. Stresses acquired at temperatures above the strain point, and not relaxed by annealing, remain in the glass indefinitely and may cause either short-term or much delayed failure. Stresses resulting from cooling too rapidly below the strain point largely are considered temporary, although they may be sufficient to cause short-term failure. Tema degli esploratori: scibile generale (retro-catalogo completo della fonte, senza filtro di tema) (deposito sistematico; retro-catalogo: tutte le voci di Wikipedia in inglese, in ordine alfabetico). Fonte: Wikipedia in inglese, voce «Annealing (glass)» — https://en.wikipedia.org/wiki/Annealing_(glass) Wikidata Q4339544: «proces for relieving stress in manufactured glass» (dati Wikidata in CC0 1.0) — https://www.wikidata.org/wiki/Q4339544 Autori: i contributori di Wikipedia (cronologia: https://en.wikipedia.org/wiki/Annealing_(glass)?action=history). Licenza: Creative Commons Attribuzione-Condividi allo stesso modo 4.0 (CC BY-SA 4.0) — https://creativecommons.org/licenses/by-sa/4.0/. Il riuso richiede attribuzione e stessa licenza. Estratto dell'introduzione non modificato nel contenuto; revisione 1381996299, consultata il 2026-11-09T11:28:50.416Z tramite l'API ufficiale di Wikipedia. Impronta SHA-256 dell'estratto: 2e0376e4e596859a5a901eff98ea2b0343c0b10fbc3594e88607a586a2b13494