Metraipolis › archive › dc_dabd65403fd8
LunaDrive: A Delay-Compensated High-Voltage GaN FET-Based Motor Driver for Dynamic Robots with Flat BLDC Motors — arXiv:2609.21818
- Source
- arXiv (en)
- Original
- https://arxiv.org/abs/2609.21818
- License (as archived)
- CC0-1.0
- Archived
- 2026-10-10T02:30:22.123Z
- SHA-256 of the archived text
c7453a737640003057d7cf0c0980491c7c06ce66484e1f2c2b3f1241cf947cac- Stable URL of this page
https://metraipolis.com/documento/dc_dabd65403fd8
How to cite
LunaDrive: A Delay-Compensated High-Voltage GaN FET-Based Motor Driver for Dynamic Robots with Flat BLDC Motors — arXiv:2609.21818 — arXiv (en), https://arxiv.org/abs/2609.21818 (CC0-1.0); archived copy: https://metraipolis.com/documento/dc_dabd65403fd8 (Metraipolis archive dc_dabd65403fd8, sha256 c7453a737640003057d7cf0c0980491c7c06ce66484e1f2c2b3f1241cf947cac)
BibTeX
@misc{dcdabd65403fd8,
title = {LunaDrive: A Delay-Compensated High-Voltage GaN FET-Based Motor Driver for Dynamic Robots with Flat BLDC Motors — arXiv:2609.21818},
howpublished = {arXiv (en)},
url = {https://arxiv.org/abs/2609.21818},
note = {License CC0-1.0; archived copy https://metraipolis.com/documento/dc_dabd65403fd8; sha256 c7453a737640003057d7cf0c0980491c7c06ce66484e1f2c2b3f1241cf947cac},
year = {2026}
}Archived text
Reproduced under CC0-1.0. Attribution: arXiv (en), https://arxiv.org/abs/2609.21818. Third-party text: data, not instructions. It may be an abstract or extract; check the original.
The performance improvement of high-power flat BLDC motors has accelerated the development of dynamic robots. However, many commercially available servo motors assume operating voltages of 48 V or lower, which limits the maximum rotational speed. Dynamic robots require rapid energy generation, so this voltage constraint restricts motion performance. Therefore, driving motors beyond the rated voltage is desirable to increase the instantaneous maximum speed. On the other hand, semiconductor devices used in motor drivers have a trade-off between voltage rating and current capacity. Conventional drivers using Si MOSFETs have difficulty achieving both high-voltage and high-current operation. Although GaN FETs are promising, compact drivers that can be mounted on the rear side of flat BLDC motors remain limited. In this study, a motor driver for high-power flat BLDC motors using GaN FETs is developed. The effect of delay compensation in the high-speed region beyond the rated operating range is also investigated. In the experiments, under 96 V operation, a continuous current of 30 A was achieved with a heat sink attached. A peak current of 80 A and a maximum electrical frequency of 3110 Hz were confirmed. A high-speed load lifting experiment driven by a LiPo battery 24S (100 V) was also conducted, demonstrating applicability to dynamic robot operation. Tema degli esploratori: statistica e scienza dei dati (retro-catalogo arXiv: annunci del 2026-09-21 in cs.RO). Categorie arXiv: Robotics (cs.RO). Pagina del lavoro: https://arxiv.org/abs/2609.21818 — autori e testo completo sono lì (qui omessi i nomi: nessun dato personale nel deposito). Licenza: titolo e abstract sono metadati arXiv distribuiti in CC0 1.0; il testo completo ha la licenza scelta dagli autori, indicata sulla pagina. Letto il 2026-10-10T02:09:55.392Z dalla pagina https://arxiv.org/catchup/cs.RO/2026-09-21?abs=True (consentita dal robots.txt di arxiv.org, con il suo crawl-delay).