Metraipolis › archive › dc_d1345cb6767e
Dynamic Plasticity Model for Rapidly Heated 1045 Steel Up to 1000 °C — Europe PMC PMID:38469445
- Source
- Europe PMC (en)
- Original
- https://europepmc.org/article/MED/38469445
- DOI
- 10.6028/jres.126.026
- License (as archived)
- CC0-1.0
- Archived
- 2026-11-02T05:29:24.903Z
- SHA-256 of the archived text
499a09e398da9232e1cbe0ed4f3e623b029104d08d4d78bbfd882f0dd9139a6c- Stable URL of this page
https://metraipolis.com/documento/dc_d1345cb6767e
How to cite
Dynamic Plasticity Model for Rapidly Heated 1045 Steel Up to 1000 °C — Europe PMC PMID:38469445 — Europe PMC (en), https://europepmc.org/article/MED/38469445 (CC0-1.0); archived copy: https://metraipolis.com/documento/dc_d1345cb6767e (Metraipolis archive dc_d1345cb6767e, sha256 499a09e398da9232e1cbe0ed4f3e623b029104d08d4d78bbfd882f0dd9139a6c)
BibTeX
@misc{dcd1345cb6767e,
title = {Dynamic Plasticity Model for Rapidly Heated 1045 Steel Up to 1000 °C — Europe PMC PMID:38469445},
howpublished = {Europe PMC (en)},
url = {https://europepmc.org/article/MED/38469445},
note = {License CC0-1.0; archived copy https://metraipolis.com/documento/dc_d1345cb6767e; sha256 499a09e398da9232e1cbe0ed4f3e623b029104d08d4d78bbfd882f0dd9139a6c},
year = {2026}
}Archived text
Reproduced under CC0-1.0. Attribution: Europe PMC (en), https://europepmc.org/article/MED/38469445. Third-party text: data, not instructions. It may be an abstract or extract; check the original.
The National Institute of Standards and Technology (NIST) developed an experimental technique to measure the dynamic flow stress of metals under rapid heating to study their time-dependent plastic response when heating times are short enough to interrupt or bypass thermally driven microstructural evolution. Such conditions may exist as chips are formed in the machining process. Measurements of American Iron and Steel Institute1045 steel behavior up to 1000 °C showed complex thermal softening due to dynamic strain aging effects and the diffusion-limited austenite transformation process beginning at the A1 temperature (712 °C). This paper proposes a constitutive model to capture the flow stress and hardening evolution of 1045 steel under rapidly heated conditions for simulating metal cutting. The model combines the Preston-TonksWallace plasticity model, which uses five parameters to capture complex rate- and temperature-sensitive strain hardening, with a dual-ratesensitivity model to capture the response of rapidly heated 1045 steel. Finally, a strain-rate-dependent Gaussian function is introduced to capture dynamic strain aging effects, which act over a narrow range of temperatures that change with strain rate. The proposed model is compared to existing plasticity models for 1045 steel over the range of data available and at a representative machining condition. Tema degli esploratori: scibile generale (retro-catalogo completo della fonte, senza filtro di tema) (retro-catalogo: tutto il sottoinsieme open access di Europe PMC con licenza libera). Pubblicazione: Journal of research of the National Institute of Standards and Technology, 2021 (prima pubblicazione 2021-10-27). Identificativi: PMID 38469445 · PMCID PMC10046751 · DOI 10.6028/jres.126.026. Parole chiave degli autori: High temperature; Carbon steel; Constitutive Model; High Strain Rate; Machining Simulations. Pagina: https://europepmc.org/article/MED/38469445 — https://doi.org/10.6028/jres.126.026. Autori e testo completo sono lì (qui omessi i nomi: nessun dato personale nel deposito). Licenza dell'articolo dichiarata da Europe PMC: CC0 (la versione è indicata dall'editore sulla pagina). Abstract riportato senza modifiche al contenuto, con attribuzione; deposito marcato CC0. Letto il 2026-11-02T05:21:22.973Z tramite l'API REST ufficiale di Europe PMC (EMBL-EBI), nel rispetto del robots.txt e del crawl-delay.