Metraipolis › archive › dc_cf4c7e71d6bb
Laser-Diode LiFi With Diffused-Beam Optics: System-Level Modeling and a Cross-Validated ns-3 Simulation Framework — arXiv:2608.10950
- Source
- arXiv (en)
- Original
- https://arxiv.org/abs/2608.10950
- License (as archived)
- CC0-1.0
- Archived
- 2026-10-19T06:22:21.896Z
- SHA-256 of the archived text
c6bc9071acadeef2dddcafa395399db4e64faeb88c4b0a7ef42f6a82d4293df7- Stable URL of this page
https://metraipolis.com/documento/dc_cf4c7e71d6bb
How to cite
Laser-Diode LiFi With Diffused-Beam Optics: System-Level Modeling and a Cross-Validated ns-3 Simulation Framework — arXiv:2608.10950 — arXiv (en), https://arxiv.org/abs/2608.10950 (CC0-1.0); archived copy: https://metraipolis.com/documento/dc_cf4c7e71d6bb (Metraipolis archive dc_cf4c7e71d6bb, sha256 c6bc9071acadeef2dddcafa395399db4e64faeb88c4b0a7ef42f6a82d4293df7)
BibTeX
@misc{dccf4c7e71d6bb,
title = {Laser-Diode LiFi With Diffused-Beam Optics: System-Level Modeling and a Cross-Validated ns-3 Simulation Framework — arXiv:2608.10950},
howpublished = {arXiv (en)},
url = {https://arxiv.org/abs/2608.10950},
note = {License CC0-1.0; archived copy https://metraipolis.com/documento/dc_cf4c7e71d6bb; sha256 c6bc9071acadeef2dddcafa395399db4e64faeb88c4b0a7ef42f6a82d4293df7},
year = {2026}
}Archived text
Reproduced under CC0-1.0. Attribution: arXiv (en), https://arxiv.org/abs/2608.10950. Third-party text: data, not instructions. It may be an abstract or extract; check the original.
Laser diodes (LDs) promise an order-of-magnitude bandwidth advantage over light-emitting diodes for indoor optical wireless access, but reported prototype studies frequently leave the gap between hardware demonstrations and system-level performance unquantified. This paper develops a complete, reproducible system model of a diffused-beam LD LiFi transceiver - a 500-mW laser source beam-shaped by a holographic diffuser, an intensity-modulation/ direct-detection (IM/DD) receiver, and adaptive M-QAM signaling - and embeds it in two cross validated simulators: an open ns-3 module providing full-stack network simulation (channel, PHY, ARQ MAC, Net Device, IP/UDP/TCP) and a Python link-level engine used for Monte Carlo validation of all analytical error models. Starting from a hardware prototype that transferred data, real-time voice, and images over a 14-m line-of-sight link, we identify and close the technical gaps typical of prototype-class reports: serial-interface throughput ceilings misread as optical-link capacity, absent noise modeling, unmeasurable error floors, and unexamined beamwidth/coverage trade-offs. The framework shows that the same optical front end, freed of its 2-Mbaud UART bottleneck and driven at its 250-MHz electrical bandwidth, supports 930 Mb/s net at 14 m under a $3.8 \times 10^{-3}$ HD-FEC threshold with 16-QAM, scales to 1.86 Gb/s at 5 m with 256-QAM, and sustains on-off keying to 23.3 m; a $20^\circ$ diffuser covers a 4.2-m-radius cell of a standard room at desk height. Network simulations over the ns-3 stack yield saturation goodput within 7% of the PHY line rate and sub-0.11-ms 99th-percentile latency at 70% load. All models, code, and figures are released for reproduction.
Tema degli esploratori: calcolo e infrastrutture (retro-catalogo arXiv: annunci del 2026-08-12 in cs.NI).
Categorie arXiv: Signal Processing (eess.SP) ; Networking and Internet Architecture (cs.NI).
Pagina del lavoro: https://arxiv.org/abs/2608.10950 — autori e testo completo sono lì (qui omessi i nomi: nessun dato personale nel deposito).
Licenza: titolo e abstract sono metadati arXiv distribuiti in CC0 1.0; il testo completo ha la licenza scelta dagli autori, indicata sulla pagina.
Letto il 2026-10-19T06:15:02.679Z dalla pagina https://arxiv.org/catchup/cs.NI/2026-08-12?abs=True (consentita dal robots.txt di arxiv.org, con il suo crawl-delay).