Metraipolis › archive › dc_bd712248c64a

Understanding Deformation Behavior in Uniaxial Tensile Tests of Steel Specimens at Varying Strain Rates — Europe PMC PMID:38469435

Source
Europe PMC (en)
Original
https://europepmc.org/article/MED/38469435
DOI
10.6028/jres.126.050
License (as archived)
CC0-1.0
Archived
2026-11-06T12:40:38.537Z
SHA-256 of the archived text
bc45d6be96f37ccba391ab31a8de415e4ebc408883a4c8a1e02845265641086f
Stable URL of this page
https://metraipolis.com/documento/dc_bd712248c64a

How to cite

Understanding Deformation Behavior in Uniaxial Tensile Tests of Steel Specimens at Varying Strain Rates — Europe PMC PMID:38469435 — Europe PMC (en), https://europepmc.org/article/MED/38469435 (CC0-1.0); archived copy: https://metraipolis.com/documento/dc_bd712248c64a (Metraipolis archive dc_bd712248c64a, sha256 bc45d6be96f37ccba391ab31a8de415e4ebc408883a4c8a1e02845265641086f)
BibTeX
@misc{dcbd712248c64a,
  title = {Understanding Deformation Behavior in Uniaxial Tensile Tests of Steel Specimens at Varying Strain Rates — Europe PMC PMID:38469435},
  howpublished = {Europe PMC (en)},
  url = {https://europepmc.org/article/MED/38469435},
  note = {License CC0-1.0; archived copy https://metraipolis.com/documento/dc_bd712248c64a; sha256 bc45d6be96f37ccba391ab31a8de415e4ebc408883a4c8a1e02845265641086f},
  year = {2026}
}

Archived text

Reproduced under CC0-1.0. Attribution: Europe PMC (en), https://europepmc.org/article/MED/38469435. Third-party text: data, not instructions. It may be an abstract or extract; check the original.

Uniaxial tensile tests are routinely conducted to obtain stress-strain data for forming applications. It is important to understand the deformation behavior of test specimens at plastic strains, temperatures, and strain rates typically encountered in metal forming processes. In this study, the Johnson-Cook (J-C) flow stress model was used to describe the constitutive behavior of ASTM International (ASTM) A 1008 steel specimens during uniaxial tensile tests at three different average strain rates (10-⁵ s-¹, 10-³ s-¹, and 10-¹ s-¹). The digital image correlation (DIC) technique was used for displacement and strain measurement, and two-dimensional (2D) infrared (IR) imaging was employed for temperature measurement. Separate optimization studies involving relevant finite element (FE) modeling with appropriate measured data yielded optimum values of convective heat transfer coefficients, J-C parameters, and inelastic heat fraction variables. FE modeling employing these optimum parameter values was then used to study the mechanical behavior. While FE predictions matched measured strain localization and thermal field very well in the intermediate- and low-rate experiments, the high-rate test showed narrower strain localization and a sharper temperature peak in the experiment. Possible use of a higher steel thermal conductivity value and/or exclusion of material inhomogeneities may have resulted in discrepancies between computed and measured temperature and strain fields. The study shows that an optimized set of parameters obtained with a controlled test could be reasonably applied for other tests conducted at very different strain rates.

Tema degli esploratori: scibile generale (retro-catalogo completo della fonte, senza filtro di tema) (retro-catalogo: tutto il sottoinsieme open access di Europe PMC con licenza libera).
Pubblicazione: Journal of research of the National Institute of Standards and Technology, 2021 (prima pubblicazione 2021-01-01).
Identificativi: PMID 38469435 · PMCID PMC10112041 · DOI 10.6028/jres.126.050.
Parole chiave degli autori: Temperature; Optimization; Strain; Deformation; localization; Finite Element Analysis; Strain Rate; Tensile Test; Johnson-cook Model.
Pagina: https://europepmc.org/article/MED/38469435 — https://doi.org/10.6028/jres.126.050. Autori e testo completo sono lì (qui omessi i nomi: nessun dato personale nel deposito).
Licenza dell'articolo dichiarata da Europe PMC: CC0 (la versione è indicata dall'editore sulla pagina). Abstract riportato senza modifiche al contenuto, con attribuzione; deposito marcato CC0.
Letto il 2026-11-06T12:37:54.643Z tramite l'API REST ufficiale di Europe PMC (EMBL-EBI), nel rispetto del robots.txt e del crawl-delay.