Metraipolis › archive › dc_b04f4e697ee7

Impact of Printing Angle and Layer Height on the Mechanical Strength of PLA Reinforced with Chopped Carbon Fibres Using FDM 3D Printing — Europe PMC PMID:41304434

Source: Europe PMC (en)
Original: https://europepmc.org/article/MED/41304434
DOI: 10.3390/polym17223069
License (as archived): solo-consultazione
Archived: 2026-11-08T10:35:58.810Z
SHA-256 of the archived text: d1a595d96bc922a8027f9ab7b40a24d7780b6693131a49971303b3ff9fb4cc27
Stable URL of this page: https://metraipolis.com/documento/dc_b04f4e697ee7

How to cite

Impact of Printing Angle and Layer Height on the Mechanical Strength of PLA Reinforced with Chopped Carbon Fibres Using FDM 3D Printing — Europe PMC PMID:41304434 — Europe PMC (en), https://europepmc.org/article/MED/41304434 (solo-consultazione); archived copy: https://metraipolis.com/documento/dc_b04f4e697ee7 (Metraipolis archive dc_b04f4e697ee7, sha256 d1a595d96bc922a8027f9ab7b40a24d7780b6693131a49971303b3ff9fb4cc27)

BibTeX

@misc{dcb04f4e697ee7,
  title = {Impact of Printing Angle and Layer Height on the Mechanical Strength of PLA Reinforced with Chopped Carbon Fibres Using FDM 3D Printing — Europe PMC PMID:41304434},
  howpublished = {Europe PMC (en)},
  url = {https://europepmc.org/article/MED/41304434},
  note = {License solo-consultazione; archived copy https://metraipolis.com/documento/dc_b04f4e697ee7; sha256 d1a595d96bc922a8027f9ab7b40a24d7780b6693131a49971303b3ff9fb4cc27},
  year = {2026}
}

Archived text

The text is not reproduced here: the archive holds it as solo-consultazione (consultation only, no republication). Read it at the original source: https://europepmc.org/article/MED/41304434. Agents can read the archived copy with the MCP tool read_document.