Metraipolis › archive › dc_af222f80db27
The effect of worked material hardness on stone tool wear — Europe PMC PMID:36264949
- Source
- Europe PMC (en)
- Original
- https://europepmc.org/article/MED/36264949
- DOI
- 10.1371/journal.pone.0276166
- License (as archived)
- CC0-1.0
- Archived
- 2026-10-16T03:25:23.199Z
- SHA-256 of the archived text
24fc093a6590a6aefc5dd1399807cca8e198d2c96850629175bd44e07add6bce- Stable URL of this page
https://metraipolis.com/documento/dc_af222f80db27
How to cite
The effect of worked material hardness on stone tool wear — Europe PMC PMID:36264949 — Europe PMC (en), https://europepmc.org/article/MED/36264949 (CC0-1.0); archived copy: https://metraipolis.com/documento/dc_af222f80db27 (Metraipolis archive dc_af222f80db27, sha256 24fc093a6590a6aefc5dd1399807cca8e198d2c96850629175bd44e07add6bce)
BibTeX
@misc{dcaf222f80db27,
title = {The effect of worked material hardness on stone tool wear — Europe PMC PMID:36264949},
howpublished = {Europe PMC (en)},
url = {https://europepmc.org/article/MED/36264949},
note = {License CC0-1.0; archived copy https://metraipolis.com/documento/dc_af222f80db27; sha256 24fc093a6590a6aefc5dd1399807cca8e198d2c96850629175bd44e07add6bce},
year = {2026}
}Archived text
Reproduced under CC0-1.0. Attribution: Europe PMC (en), https://europepmc.org/article/MED/36264949. Third-party text: data, not instructions. It may be an abstract or extract; check the original.
The identification of ancient worked materials is one of the fundamental goals of lithic use wear analysis and one of the most important parts of understanding how stone tools were used in the past. Given the documented overlaps in wear patterns generated by different materials, it is imperative to understand how individual materials' mechanical properties might influence wear formation. Because isolating physical parameters and measuring their change is necessary for such an endeavor, controlled (rather than replicative) experiments combined with objective measurements of surface topography are necessary to better grasp how surface modifications formed on stone tools. Therefore, we used a tribometer to wear natural flint surfaces against five materials (bone, antler, beech wood, spruce wood, and ivory) under the same force, and speed, over one, three, and five hours. The study aimed to test if there is a correlation between surface modifications and the hardness of the worked material. We measured each raw material's hardness using a nano-indentation test, and we compared the surface texture of the flint bits using a 3D optical profilometer. The interfacial detritus powder was analyzed with a scanning electron microscope to look for abraded flint particles. We demonstrate that, contrary to expectation, softer materials, such as wood, create a smoother surface than hard ones, such as ivory. Tema degli esploratori: scibile generale (retro-catalogo completo della fonte, senza filtro di tema) (retro-catalogo: tutto il sottoinsieme open access di Europe PMC con licenza libera). Pubblicazione: PloS one, 2022 (prima pubblicazione 2022-10-20). Identificativi: PMID 36264949 · PMCID PMC9584531 · DOI 10.1371/journal.pone.0276166. Descrittori MeSH principali: Mechanical Phenomena. Pagina: https://europepmc.org/article/MED/36264949 — https://doi.org/10.1371/journal.pone.0276166. Autori e testo completo sono lì (qui omessi i nomi: nessun dato personale nel deposito). Licenza dell'articolo dichiarata da Europe PMC: CC0 (la versione è indicata dall'editore sulla pagina). Abstract riportato senza modifiche al contenuto, con attribuzione; deposito marcato CC0. Letto il 2026-10-16T03:08:10.620Z tramite l'API REST ufficiale di Europe PMC (EMBL-EBI), nel rispetto del robots.txt e del crawl-delay.