Metraipolis › archive › dc_ad62a38367db

Characterization of 3-Dimensional Printing and Casting Materials for use in Magnetic Resonance Imaging Phantoms at 3 T — Europe PMC PMID:35573857

Source
Europe PMC (en)
Original
https://europepmc.org/article/MED/35573857
DOI
10.6028/jres.125.028
License (as archived)
CC0-1.0
Archived
2026-11-07T12:17:54.933Z
SHA-256 of the archived text
57fed20a308be216ffb9ab01845873cf3d95ed241cfe7bc2c38a84f15f080eb3
Stable URL of this page
https://metraipolis.com/documento/dc_ad62a38367db

How to cite

Characterization of 3-Dimensional Printing and Casting Materials for use in Magnetic Resonance Imaging Phantoms at 3 T — Europe PMC PMID:35573857 — Europe PMC (en), https://europepmc.org/article/MED/35573857 (CC0-1.0); archived copy: https://metraipolis.com/documento/dc_ad62a38367db (Metraipolis archive dc_ad62a38367db, sha256 57fed20a308be216ffb9ab01845873cf3d95ed241cfe7bc2c38a84f15f080eb3)
BibTeX
@misc{dcad62a38367db,
  title = {Characterization of 3-Dimensional Printing and Casting Materials for use in Magnetic Resonance Imaging Phantoms at 3 T — Europe PMC PMID:35573857},
  howpublished = {Europe PMC (en)},
  url = {https://europepmc.org/article/MED/35573857},
  note = {License CC0-1.0; archived copy https://metraipolis.com/documento/dc_ad62a38367db; sha256 57fed20a308be216ffb9ab01845873cf3d95ed241cfe7bc2c38a84f15f080eb3},
  year = {2026}
}

Archived text

Reproduced under CC0-1.0. Attribution: Europe PMC (en), https://europepmc.org/article/MED/35573857. Third-party text: data, not instructions. It may be an abstract or extract; check the original.

Imaging phantoms are used to calibrate and validate the performance of magnetic resonance imaging (MRI) systems. Many new materials have been developed for additive manufacturing (three-dimensional [3D] printing) processes that may be useful in the direct printing or casting of dimensionally accurate, anatomically accurate, patient-specific, and/or biomimetic MRI phantoms. The T1, T2, and T2* spin relaxation times of polymer samples were tested to discover materials for use as tissue mimics and structures in MRI phantoms. This study included a cohort of polymer compounds that was tested in cured form. The cohort consisted of 101 standardized polymer samples fabricated from: two-part silicones and polyurethanes used in commercial casting processes; one-part optically cured polyurethanes used in 3D printing; and fused deposition thermoplastics used in 3D printing. The testing was performed at 3 T using inversion recovery, spin echo, and gradient echo sequences for T1, T2, and T2*, respectively. T1, T2, and T2* values were plotted with error bars to allow the reader to assess how well a polymer matches a tissue for a specific application. A correlation was performed between T1, T2, T2* values and material density, elongation, tensile strength, and hardness. Two silicones, SI_XP-643 and SI_P-45, may be usable mimics for reported liver values; one silicone, SI_XP-643, may be a useful mimic for muscle; one silicone, SI_XP-738, may be a useful mimic for white matter; and four silicones, SI_P-15, SI_GI-1000, SI_GI-1040, and SI_GI-1110, may be usable mimics for spinal cord. Elongation correlated to T2 (p = 0.0007), tensile strength correlated to T1 (p = 0.002), T2 (p = 0.0003), and T2* (p = 0.003). The 80 samples not providing measurable signal with T1, T2, T2* relaxation values too short to measure with the standard sequences, may be useful for MRI-invisible fixturing and medical devices at 3 T.

Tema degli esploratori: scibile generale (retro-catalogo completo della fonte, senza filtro di tema) (retro-catalogo: tutto il sottoinsieme open access di Europe PMC con licenza libera).
Pubblicazione: Journal of research of the National Institute of Standards and Technology, 2020 (prima pubblicazione 2020-09-15).
Identificativi: PMID 35573857 · PMCID PMC9097953 · DOI 10.6028/jres.125.028.
Parole chiave degli autori: MRI; Medical imaging; Polymer; Phantom; 3D Printing.
Pagina: https://europepmc.org/article/MED/35573857 — https://doi.org/10.6028/jres.125.028. Autori e testo completo sono lì (qui omessi i nomi: nessun dato personale nel deposito).
Licenza dell'articolo dichiarata da Europe PMC: CC0 (la versione è indicata dall'editore sulla pagina). Abstract riportato senza modifiche al contenuto, con attribuzione; deposito marcato CC0.
Letto il 2026-11-07T12:13:49.814Z tramite l'API REST ufficiale di Europe PMC (EMBL-EBI), nel rispetto del robots.txt e del crawl-delay.