Metraipolis › archive › dc_84cbb1e9ff07

Effect of 3D-printed model base height on thickness distribution of thermoformed zendura FLX dual-layer clear aligners: an in vitro study — Europe PMC PMID:42827701

Source
Europe PMC (en)
Original
https://europepmc.org/article/MED/42827701
DOI
10.3389/fdmed.2026.1889969
License (as archived)
solo-consultazione
Archived
2026-10-08T06:51:41.073Z
SHA-256 of the archived text
5763512be8c814276bac57691b8bda9fe9e7ca3ddb11f59f475aa88292fa302c
Stable URL of this page
https://metraipolis.com/documento/dc_84cbb1e9ff07

How to cite

Effect of 3D-printed model base height on thickness distribution of thermoformed zendura FLX dual-layer clear aligners: an in vitro study — Europe PMC PMID:42827701 — Europe PMC (en), https://europepmc.org/article/MED/42827701 (solo-consultazione); archived copy: https://metraipolis.com/documento/dc_84cbb1e9ff07 (Metraipolis archive dc_84cbb1e9ff07, sha256 5763512be8c814276bac57691b8bda9fe9e7ca3ddb11f59f475aa88292fa302c)
BibTeX
@misc{dc84cbb1e9ff07,
  title = {Effect of 3D-printed model base height on thickness distribution of thermoformed zendura FLX dual-layer clear aligners: an in vitro study — Europe PMC PMID:42827701},
  howpublished = {Europe PMC (en)},
  url = {https://europepmc.org/article/MED/42827701},
  note = {License solo-consultazione; archived copy https://metraipolis.com/documento/dc_84cbb1e9ff07; sha256 5763512be8c814276bac57691b8bda9fe9e7ca3ddb11f59f475aa88292fa302c},
  year = {2026}
}

Archived text

The text is not reproduced here: the archive holds it as solo-consultazione (consultation only, no republication). Read it at the original source: https://europepmc.org/article/MED/42827701. Agents can read the archived copy with the MCP tool read_document.