Metraipolis › archive › dc_73fca747c8b1
Enabling Tidying Tasks in Robotic Vacuum Cleaners via a Geometry-Induced Self-Locking Deployable Linkage — arXiv:2610.20150
- Source
- arXiv (en)
- Original
- https://arxiv.org/abs/2610.20150
- License (as archived)
- CC0-1.0
- Archived
- 2026-10-15T15:03:08.933Z
- SHA-256 of the archived text
de322fc488d10a75bbba52698c4f427f20fd06eef0c5fe3bb86d97b0ffd15fab- Stable URL of this page
https://metraipolis.com/documento/dc_73fca747c8b1
How to cite
Enabling Tidying Tasks in Robotic Vacuum Cleaners via a Geometry-Induced Self-Locking Deployable Linkage — arXiv:2610.20150 — arXiv (en), https://arxiv.org/abs/2610.20150 (CC0-1.0); archived copy: https://metraipolis.com/documento/dc_73fca747c8b1 (Metraipolis archive dc_73fca747c8b1, sha256 de322fc488d10a75bbba52698c4f427f20fd06eef0c5fe3bb86d97b0ffd15fab)
BibTeX
@misc{dc73fca747c8b1,
title = {Enabling Tidying Tasks in Robotic Vacuum Cleaners via a Geometry-Induced Self-Locking Deployable Linkage — arXiv:2610.20150},
howpublished = {arXiv (en)},
url = {https://arxiv.org/abs/2610.20150},
note = {License CC0-1.0; archived copy https://metraipolis.com/documento/dc_73fca747c8b1; sha256 de322fc488d10a75bbba52698c4f427f20fd06eef0c5fe3bb86d97b0ffd15fab},
year = {2026}
}Archived text
Reproduced under CC0-1.0. Attribution: arXiv (en), https://arxiv.org/abs/2610.20150. Third-party text: data, not instructions. It may be an abstract or extract; check the original.
Robotic vacuum cleaners must extend their functionality within tight limits on size, cost, and durability. Deployable linkages with few actuators meet these limits, but their backdrivability makes it difficult to hold a load-bearing posture without continuous motor torque. We introduce a two-stage deployable linkage that is self-locking, in the sense used for toggle and singularity-based linkages, through its own geometry: at full deployment an internal three-link subchain approaches a collinear, near-singular configuration where the input--output transmission ratio approaches zero, so that plate loads produce a small residual back-driving torque, absorbed by drive-train friction and a lightweight magnetic detent. A single actuator performs deployment and locking, a passive chassis-mounted trigger releases the lock for retraction, and a second actuator adjusts only the deployment height. We integrate the mechanism into a commercial robotic vacuum cleaner and validate it through a 100-cycle repeatability test, a quasi-static load test in which the locked plate held 50\,N with the motor de-energized, and 140 pushing-type tidying trials on seven household objects against a commercial arm-equipped vacuum robot under a documented protocol. We derive the analytical holding condition and discuss its limits as an intermediate design point between passive compliance and articulated manipulation. Tema degli esploratori: calcolo e infrastrutture (elenco arXiv eess.SY, nuovi lavori del giorno). Categorie arXiv: Robotics (cs.RO) ; Systems and Control (eess.SY). Pagina del lavoro: https://arxiv.org/abs/2610.20150 — autori e testo completo sono lì (qui omessi i nomi: nessun dato personale nel deposito). Licenza: titolo e abstract sono metadati arXiv distribuiti in CC0 1.0; il testo completo ha la licenza scelta dagli autori, indicata sulla pagina. Letto il 2026-10-15T14:07:08.615Z dalla pagina https://arxiv.org/list/eess.SY/new (consentita dal robots.txt di arxiv.org, con il suo crawl-delay).