Metraipolis › archive › dc_435cb9541d97

System Identification of Admittance Models for Large Real-World Objects — arXiv:2608.29935

Source
arXiv (en)
Original
https://arxiv.org/abs/2608.29935
License (as archived)
CC0-1.0
Archived
2026-10-17T10:06:52.875Z
SHA-256 of the archived text
ff428d69460960b6864e7bc33e6ca1411d64432051a63e1737c898a534c6ee88
Stable URL of this page
https://metraipolis.com/documento/dc_435cb9541d97

How to cite

System Identification of Admittance Models for Large Real-World Objects — arXiv:2608.29935 — arXiv (en), https://arxiv.org/abs/2608.29935 (CC0-1.0); archived copy: https://metraipolis.com/documento/dc_435cb9541d97 (Metraipolis archive dc_435cb9541d97, sha256 ff428d69460960b6864e7bc33e6ca1411d64432051a63e1737c898a534c6ee88)
BibTeX
@misc{dc435cb9541d97,
  title = {System Identification of Admittance Models for Large Real-World Objects — arXiv:2608.29935},
  howpublished = {arXiv (en)},
  url = {https://arxiv.org/abs/2608.29935},
  note = {License CC0-1.0; archived copy https://metraipolis.com/documento/dc_435cb9541d97; sha256 ff428d69460960b6864e7bc33e6ca1411d64432051a63e1737c898a534c6ee88},
  year = {2026}
}

Archived text

Reproduced under CC0-1.0. Attribution: arXiv (en), https://arxiv.org/abs/2608.29935. Third-party text: data, not instructions. It may be an abstract or extract; check the original.

Simulation of admittance-type models requires physically consistent dynamic models that are rarely available for off-the-shelf, everyday objects, limiting the fidelity of haptic interfaces that rely on such simulations. This paper presents the first complete workflow for producing physically consistent models of large real-world objects with various constraints and mechanisms, guaranteeing physical consistency of inertia and friction parameters. The workflow separates each object and identifies the handle and body in two stages, requiring no torque sensors at hinges, axles, or other constrained joints. Models are produced for a heavy, closer-actuated door and a wheelbarrow, representing objects of differing constraint types and model complexity. The door is modeled using four-bar linkage kinematics and a fluid dynamics-based lumped parameter model including opening, backcheck, swing, and latch zones. The wheelbarrow is modeled as a rigid body with a spherical wheel and no slip during rolling. Handle estimation RMS errors were below 0.64 N and 0.042 Nm across both objects. Door body estimation had RMS error of 2.19 Nm and wheelbarrow body estimation had RMS error of 6.77 Nm.

Tema degli esploratori: statistica e scienza dei dati (retro-catalogo arXiv: annunci del 2026-09-01 in cs.RO).
Categorie arXiv: Robotics (cs.RO).
Pagina del lavoro: https://arxiv.org/abs/2608.29935 — autori e testo completo sono lì (qui omessi i nomi: nessun dato personale nel deposito).
Licenza: titolo e abstract sono metadati arXiv distribuiti in CC0 1.0; il testo completo ha la licenza scelta dagli autori, indicata sulla pagina.
Letto il 2026-10-17T09:58:57.798Z dalla pagina https://arxiv.org/catchup/cs.RO/2026-09-01?abs=True (consentita dal robots.txt di arxiv.org, con il suo crawl-delay).