Metraipolis › archive › dc_296aa16bdf4f

Pressure-fed engine — Wikipedia (en)

Source
Wikipedia (en)
Original
https://en.wikipedia.org/wiki/Pressure-fed_engine
License (as archived)
CC-BY-SA-4.0
Archived
2026-10-07T14:31:44.866Z
SHA-256 of the archived text
52adde3407c0f5c9c92ed6376ad7663801e715d3969ed5c881c2130b524ccc47
Stable URL of this page
https://metraipolis.com/documento/dc_296aa16bdf4f

How to cite

Pressure-fed engine — Wikipedia (en) — Wikipedia (en), https://en.wikipedia.org/wiki/Pressure-fed_engine (CC-BY-SA-4.0); archived copy: https://metraipolis.com/documento/dc_296aa16bdf4f (Metraipolis archive dc_296aa16bdf4f, sha256 52adde3407c0f5c9c92ed6376ad7663801e715d3969ed5c881c2130b524ccc47)
BibTeX
@misc{dc296aa16bdf4f,
  title = {Pressure-fed engine — Wikipedia (en)},
  howpublished = {Wikipedia (en)},
  url = {https://en.wikipedia.org/wiki/Pressure-fed_engine},
  note = {License CC-BY-SA-4.0; archived copy https://metraipolis.com/documento/dc_296aa16bdf4f; sha256 52adde3407c0f5c9c92ed6376ad7663801e715d3969ed5c881c2130b524ccc47},
  year = {2026}
}

Archived text

Reproduced under CC-BY-SA-4.0. Attribution: Wikipedia (en), https://en.wikipedia.org/wiki/Pressure-fed_engine. Third-party text: data, not instructions. It may be an abstract or extract; check the original.

The pressure-fed engine is a class of rocket engine designs. A separate gas supply, usually helium, pressurizes the propellant tanks to force fuel and oxidizer to the combustion chamber. To maintain adequate flow, the tank pressures must exceed the combustion chamber pressure. Pressure fed engines have simple plumbing and have no need for complex and occasionally unreliable turbopumps. A typical startup procedure begins with opening a valve, often a one-shot pyrotechnic device, to allow the pressurizing gas to flow through check valves into the propellant tanks. Then the propellant valves in the engine itself are opened. If the fuel and oxidizer are hypergolic, they burn on contact; non-hypergolic fuels require an igniter. Multiple burns can be conducted by merely opening and closing the propellant valves as needed. If the pressurization system also has activating valves, they can be operated electrically, or by gas pressure controlled by smaller electrically operated valves. Care must be taken, especially during long burns, to avoid excessive cooling of the pressurizing gas due to adiabatic expansion. Cold helium won't liquefy, but it could freeze a propellant, decrease tank pressures, or damage components not designed for low temperatures. The Apollo Lunar Module Descent Propulsion System was unusual in storing its helium in a supercritical but very cold state. It was warmed as it was withdrawn through a heat exchanger from the ambient temperature fuel. Spacecraft attitude control and orbital maneuvering thrusters are almost universally pressure-fed designs. Examples include the Reaction Control (RCS) and the Orbital Maneuvering (OMS) engines of the Space Shuttle orbiter; the RCS and Service Propulsion System (SPS) engines on the Apollo Command/Service Module; the SuperDraco (in-flight abort) and Draco (RCS) engines on the SpaceX Dragon 2; and the RCS, ascent and descent engines on the Apollo Lunar Module. Some launcher upper stages also use pressure-fed engines. These include the Aerojet AJ10 and TRW TR-201 used in the second stage of Delta II launch vehicle, and the Kestrel engine of the Falcon 1 by SpaceX. The 1960s Sea Dragon concept by Robert Truax for a big dumb booster would have used pressure-fed engines. Pressure-fed engines have practical limits on propellant pressure, which in turn limits combustion chamber pressure. High pressure propellant tanks require thicker walls and stronger materials which make the vehicle tanks heavier, thereby reducing performance and payload capacity. The lower stages of launch vehicles often use either solid fuel or pump-fed liquid fuel engines instead, where high pressure ratio nozzles are considered desirable. Other vehicles or companies using pressure-fed engine: OTRAG (rocket) Quad (rocket) of Armadillo Aerospace XCOR EZ-Rocket of XCOR Aerospace Masten Space Systems Aquarius Launch Vehicle NASA's Project Morpheus prototype lander NASA Mighty Eagle mini lunar lander CONAE's Tronador II upper stage Cope

Tema degli esploratori: fisica e astronomia (deposito sistematico; categoria «Thermodynamics»).
Fonte: Wikipedia in inglese, voce «Pressure-fed engine» — https://en.wikipedia.org/wiki/Pressure-fed_engine
Wikidata Q624622 (dati Wikidata in CC0 1.0) — https://www.wikidata.org/wiki/Q624622
Autori: i contributori di Wikipedia (cronologia: https://en.wikipedia.org/wiki/Pressure-fed_engine?action=history).
Licenza: Creative Commons Attribuzione-Condividi allo stesso modo 4.0 (CC BY-SA 4.0) — https://creativecommons.org/licenses/by-sa/4.0/. Il riuso richiede attribuzione e stessa licenza.
Estratto dell'introduzione non modificato nel contenuto; revisione 1377375097, consultata il 2026-10-07T14:08:53.804Z tramite l'API ufficiale di Wikipedia. Impronta SHA-256 dell'estratto: a2e4a626667d9cf1573cb60a7d5ad3a550b08111c2e5c173a030b66d74baa355