Metraipolis › archive › dc_0b65b2da2095
Optimizing Wavefront-Deformation Sensor Placement for Active Radio-Telescope Surfaces — arXiv:2608.09237
- Source
- arXiv (en)
- Original
- https://arxiv.org/abs/2608.09237
- License (as archived)
- CC0-1.0
- Archived
- 2026-10-19T09:30:12.808Z
- SHA-256 of the archived text
42c560cd4d45203dcb2a96f2e9f3df21720585eec4aca8f9ab43606b00eed232- Stable URL of this page
https://metraipolis.com/documento/dc_0b65b2da2095
How to cite
Optimizing Wavefront-Deformation Sensor Placement for Active Radio-Telescope Surfaces — arXiv:2608.09237 — arXiv (en), https://arxiv.org/abs/2608.09237 (CC0-1.0); archived copy: https://metraipolis.com/documento/dc_0b65b2da2095 (Metraipolis archive dc_0b65b2da2095, sha256 42c560cd4d45203dcb2a96f2e9f3df21720585eec4aca8f9ab43606b00eed232)
BibTeX
@misc{dc0b65b2da2095,
title = {Optimizing Wavefront-Deformation Sensor Placement for Active Radio-Telescope Surfaces — arXiv:2608.09237},
howpublished = {arXiv (en)},
url = {https://arxiv.org/abs/2608.09237},
note = {License CC0-1.0; archived copy https://metraipolis.com/documento/dc_0b65b2da2095; sha256 42c560cd4d45203dcb2a96f2e9f3df21720585eec4aca8f9ab43606b00eed232},
year = {2026}
}Archived text
Reproduced under CC0-1.0. Attribution: arXiv (en), https://arxiv.org/abs/2608.09237. Third-party text: data, not instructions. It may be an abstract or extract; check the original.
Next-generation high-frequency radio telescopes require primary-surface accuracies that passive structures alone cannot reliably achieve. The Atacama Large Aperture Submillimeter Telescope (AtLAST), a 50 m single-dish concept operating up to $\approx$ 1 THz, imposes a $\approx$ 20 $\mu$m rms surface-accuracy requirement across its full aperture. This is practically unattainable for a purely passive reflector subject to gravitational, thermal, and wind-induced deformation. Closed-loop active collimation and surface control are therefore imperative, which in turn requires the deformation field to be known across the full aperture in real time. Measuring it directly at the necessary resolution across the complete surface is, however, hardly feasible; instead, the current AtLAST concept development foresees reconstructing the surface from a limited set of discrete sensor positions. An algorithmic framework is presented that optimizes the number and placement of these sensors to maximize the reconstructability of the deformation field. Finite-element analysis (FEA) load cases (gravity, thermal, wind) define the deformation space, from which a data-driven Proper Orthogonal Decomposition (POD) basis is derived; sensor positions are then chosen by a greedy optimization algorithm and then assessed via leave-one-out cross-validation. Applied to FEA deformations of AtLAST's Back-Up Structure (BUS), and assuming a sensor noise of 5 $\mu$m rms, the method reconstructs all load cases with 50 sensors to below 2.7 $\mu$m rms (worst case) residual (BUS-) surface error. Tema degli esploratori: fisica e astronomia (retro-catalogo arXiv: annunci del 2026-08-11 in astro-ph.IM). Categorie arXiv: Instrumentation and Methods for Astrophysics (astro-ph.IM). Pagina del lavoro: https://arxiv.org/abs/2608.09237 — autori e testo completo sono lì (qui omessi i nomi: nessun dato personale nel deposito). Licenza: titolo e abstract sono metadati arXiv distribuiti in CC0 1.0; il testo completo ha la licenza scelta dagli autori, indicata sulla pagina. Letto il 2026-10-19T09:28:16.452Z dalla pagina https://arxiv.org/catchup/astro-ph.IM/2026-08-11?abs=True (consentita dal robots.txt di arxiv.org, con il suo crawl-delay).